High Pressure Hydraulic Hose Pipe Crimping Machine Making Air
Suspension Spring
Quick Details:
Description: High Pressure Hydraulic Hose Pipe Crimping Machine Making Air
Suspension Spring
Dimension: L850*W900*H1300mm
Crimping Range: 20mm-175mm
Standard Die Sets: 10 sets
Voltage: 380V and 220V
Crimping Force: 100T
System Pressure: 30 Mpa
Accuracy: 0.05mm
Power: 3.5KW
Gross Weight: 350Kg
Warranty: 12 Months
Machine Picture:
Guangzhou Tech Master Auto Parts Co. Ltd. is one of Chinese leading auto suspension parts supplier. We
provide a wide range of air suspension shock, air suspension
spring, air suspension compressor, power steering rack, power
steering pump, cooling fan, air suspension crimping machine, air
suspension repair kits and etc,especially for Mercedes-Benz, BMW,
Audi, Land Rover, Lincoln, Bentley, VW Phaeton, Lexus, Toyota, and
Ford. We also supply other models of the air spring for heavy truck
and industrial spring.
With more than 12 years development, the company's first - class
product quality and dedied service attitude have won recognition at
home and abroad.So our air suspension parts not only enjoy graet
popularity in domestic market,but export to North
America,Europe,MiddleEast,Africa,Southeast more than 40countries
and regions.
Installation and Operation:
1. Regulating the scale
The scale is used for regulating the amount of the buckling. When
it is regulated clockwise, the buckling amount will decrease, when
it is regulated anticlockwise, the buckling amount will increase.
The scale is connected together with oil cylinder end cover through
three socket head screws and three springs on the scale base. When
using a hand to pull the scale (vertical to the oil cylinder end
cover direction), the scale can flexibly leave from the oil
cylinder end cover. When releasing the scale, the scale will be
recovered relying on spring force. Before the machine is turned on,
inspect carefully if the scale telescoping is flexible and if the
lead connection is reliable.
The primary scale is turned within 0 line of the secondary scale,
turn the machine on for test run, and observe if all actions are
normal. If when the piston conducts reciproing movement, there is a
crawling phenomenon, the bleed screw on the oil cylinder top shall
be unscrewed for exhausting air.
2. Pressure regulation
The buckling pressure and opening mould pressure will be regulated
through two knobs at the back of the oil cylinder, when it is
regulated clockwise, the pressure will increase, when it is
regulated anticlockwise, the pressure will decrease (The pressure
has already been well regulated when ex-factory).
3. Operation
Based on the size of the rubber hose to be buckled, select suitable
mould as per the technical parameter reference table of the locking
pipe and mount it on the mould base. Regulated well the scale
position as per the data in the data in the table, the pipe locking
can be done. After pipe locking, use a vernier caliper to mease the
outside diameter dimension of the pipe sleeve after buckling to see
if it meets the reference table data of the parameter. If it does
not meet the data, the scale shall be precisely regulated until it
meets the requirements. Because the manufactures of the pipe sleeve
are different, so, specific dimension, material, hardness etc are
certainly not the same. These factors would result different
influences on the pipe locking result, therefore, the data in the
table is only for reference, the detailed data take the pressure
test as the basis.
Notices:
1. Add sufficiently 25g of 46# anti-abrasion hydraulic oil.(the
original is the best).
2. When buckling, make the joint to loe the mould center as much as
possible, the joint is not buckled on the hex nut.
3. Prevent tool and other foreign matter from entering the locking
head.
4. After the work is finished for each time, the eight-block mould
base must be made to extend to the greatest extent, this can make
the spring to be at extension status. If not, the spring will be
damage.
5. When working, the hand should not stretch into the locking head.
6. The power supply must be switched off when maintenance is done.
7. Be careful that three-phase machine can’t be in reverse.
(Overhead view: motor fan rotates in clockwise direction that is
the forward direction.)
We Also Supply Many Air Suspension Air Spring Products for
Mercedes, BWW, Audi, Land Rover, Porsche, Toyota, Lexus and Other
Cars.
Production Base:
Contcact us
If you have any question,pls do not hesitate to contact with us.
Contract Name: Anita Huang
Mob: +86 18819270286(WhatsApp)
Tel: 86-20-36163613
Skype:tmairsuspension_Andy
Room 605,Zhizao Plaza,No,933 Guanghua 1st Road, Guangzhou, China,
Post code 510440
Web: http://www.airsuspensioncarparts.com/
http://tmairsuspension.en.alibaba.com/
